Included tags: Printer ×
Excluded tags: None
Image

PC 486SX (ao486) • QNX 4.25 (Unix-like OS) on ao486

MISTerFPGA about 12 days ago

Hello community,Preliminary notes:QNX is a Unix-like microkernel real-time OS, primarily targeted for embedded devices and which some of you might remember for its amazing 1.44 MB floppy demo from mid '90s sporting a fully bootable OS, GUI, mouse support, …

Hardware • Einstein TC-01 spacebar parts?

Tatung Forum about 1 month ago

Hi All,I'm in the last stages of getting this Einstein all sorted but am on the hunt for the plastic bar that goes underneath the spacebar. The one on mine is broken and there are parts from it that are long gone. If no-one has any spare parts kicking a …
Image

Upcoming Game Boy Title Gunship DX Has Built-In Rumble

Time Extension about 1 month ago

Ready to...?Back in the day, Nintendo got pretty inventive when it came to prolonging the lifespan of its Game Boy hardware. Devices like the Game Boy Camera and Game Boy Printer expanded the appeal of the ageing handheld, and some Game Boy Color cartridge …
Image

The Game Boy Printer has a test print function whereby turning on the power while holding down the…

Supper Mario Broth about 2 months ago

The Game Boy Printer has a test print function whereby turning on the power while holding down the “Feed” button will cause it to print out an extremely small (note the human fingers for size comparison) image of Mario saying “Hello!&rdqu …
Image

IWM reverse engineering

Apple Fritter about 2 months ago

After probing the waters in this thread: https://www.applef... finally got enough motivation to proceed with reverse engineering the IWM myself. I'm well aware that other have done that long ago, …

Grappler CD by Orange Micro

VCFed about 3 months ago

I recently bought a printer interface cartridge for my Commodore 64, a Grappler CD by Orange Micro. I needed it for the interface as one of my printers is not the usual serial DIN connector, and I liked this because the cover is translucent (I like my see …

RIFA Caps replacements to have on hand?

VCFed about 3 months ago

Hi I would like to have a small supply of RIFA cap replacements on hand for when I might need one. But I do not have the vocabulary to find what I need on mouser or digi-key. They would be for like apple II line PSU's, AT PSU's, Printer PSU's, Mac PSU's, …

IBM 5150 + 5153 computer sale to raise money for my studies.

VCFed about 3 months ago

I would like to sell the whole system ( Monitor, PC, Keyboard and Printer ( the images are in the link below ) I'm from Argentina. ?. Me gustaría vender todo el sistema ( Monitor, PC, Teclado e impresora ( Las imágenes se encuentran en el link de abajo ) …

3D printed Model 1 parts

VCFed about 3 months ago

Is there someone who prints parts for the model 1 like the Main_Enclosure_Panel? Dont own a 3d printer. Thanks Joe …

WTB: DEC M8027 line printer controller cable to Centronics...

VCFed about 3 months ago

I have a PDP-11/83 that I'd like to attach a printer to, The Qbus M8027 line printer card that i have is missing the cable going to the printer. Let me know if you have one for sale. …

Does anyone have a full kit like the pc 2 with printer cassette player and cassette’s?

VCFed about 3 months ago

Recently got interested in these they seem really cool maybe I could graph in all four colours, or use those tiny tape programs like with the 1246. Sound off about your setup ! …

Emulated parallel printer

VCFed about 3 months ago

Has anyone developed a kind of "emulated parallel printer"? You attach it to a vintage/classic parallel port, and perhaps it can emulate a variety of printers (or the protocol of just a few popular ones). But you could "print to" the …
Image

IIC Apple Scribe Printer - Select light flashing 3 times

Apple Fritter about 3 months ago

Hello, I have a fairly clean IIC Apple Scribe Printer, select light flashing 3 times.  I've checked that paper and ribbon are loaded and the cover is in place.  According to the manual 3 flashes per second indicates "out of ribbon."   I disconnected th …

Hardware Setups • My New MiSTer

MISTerFPGA about 3 months ago

Hi,just want to show my new build. Had a MiSTer previously when the project started years ago, but was always dissatisfied with it because of the available options regarding the casing, so I sold the setup not long after and sticked with my MiST. Until re …
Image

Mystery Part in Apple II Plus

Apple Fritter about 3 months ago

Hello, I am new to Apple II's and, recently, purchased an Apple II Plus off of ebay for a great price.  There was no guarantee of it working, but, that's ok.  It had 3 cards and the price was good.   :-) Inside the case, I found a mystery part and it …

Floppy Disk Controller Cartridge help ?

VCFed about 4 months ago

I have this device that works.. v1.1 Disk extended basic cartridge for Tandy Coco computers I would like to know if anyone knows if there is a 3d printer STL to make a cartridge box for it. ? thanks Patrick …
Image

Need D-Sub panel fillers?

VCFed about 4 months ago

If you've got a 3D printer or know someone that does, I've got a solution for you! ... is a parametric design th …

High-end Apple IIe setup, looking to sell.

Apple Fritter about 4 months ago

I recently came into an Apple IIe setup that is very high end. It has pretty much all the "premium" cards in it, most of which I will never use.  I figured I would offer it out for sale as one instead of parting it out on eBay, if someone is interested. …

I have become obsessed with vintage printers.

VCFed about 4 months ago

I really have no idea how this happened, but here I am. Since I've spent literally months tinkering with various vintage printers, modern printers, and printer emulators I suppose I might as well share some of what I've found regarding vintage printers, n …

Game Boy, Game Boy Color • SNAC Link Cable with Real GameBoy Printer?

MISTerFPGA about 4 months ago

I’m considering buying an original GameBoy Printer so I can print the cute stickers from Super Mario Bros DX. As far as I understand the printer receives commands via the Link Cable, so can the MiSTer with the Link Cable SNAC be used to connect to it?In …
Image

General Discussion • Microdisc Restoration

Defence Force about 4 months ago

Hi fellow Oricians,I hope you guys are doing well. It’s a while since my last post on this forum. Meanwhile I was busy with a complete C64 setup restoration with drive, datasette and printer.I recently won a bid on eBay for a Microdisc and other stuff. …
Image

New Game Boy Title Gives You A Reason To Dust Off Your Game Boy Printer

Time Extension about 4 months ago

"There will be 12 bookmarks in my game for you to print".Ah, the Game Boy Printer – how we miss thee.One of the many leftfield accessories Nintendo has released during its history, this portable thermal printer allowed users to print off snaps they'd tak …

PC-2 / PC-1500 problem

VCFed about 4 months ago

I recently dug up my small collection of Pocket Computers and checked my 2 PC-2's and the Sharp PC-1500A. I have a rather complete selection with the Printer/Plotter, Cassette interface, RS-232 interface and a 4K, 8K and 16K ram module. After opening up th …

Apple DMP printer support and drivers for say System 6 and such.

Apple Fritter about 4 months ago

So I finally track down a RGB monitor and with it came the the APPLE DMP (dot matrix printer.). You know the one before imagewritter. According to the manaual perfect fit forApple II, II plus,  and III. Due to the centronics interface. Then later Apples l …

5.25 floppy repair (plastic part missing).

VCFed about 4 months ago

Dear Group, I have a 5.25 drive with the plastic cam missing. Ideas? I have a 3D printer and I could print something but I would need a file... the shaft is not round everywhere, there is a flat part. …