Included tags: vga ×
Excluded tags: None

Hardware Setups • MiSTer single board concept

MISTerFPGA about 8 days ago

One board, no increasing cost of modularity, except for gamepad portsMinimalistic design, only the essentials, the best ports, no industrial connectors like D-SUBEase of use, simple understandable form factor of a classic consoleAll TV connection ports fa …

Display Devices • HDMI Out to Sony PVM (VGA Adaptor to BNC)

MISTerFPGA about 22 days ago

I picked up a 14" Sony PVM last week, these dont come up too often where i live so surprisingly when a 20" came up this week i picked that up too.Id like to run the Mister to both PVM's - so i can stick the smaller one in tate mode - ive tried using a hdm …

Newcomers Forum • Questions on Getting Started FPGA Digital to Analog Sound CRT

MISTerFPGA about 25 days ago

Just got a Sony KV-32FS10 and want to give the MiSTerFPGA a go. I only see Digital boards available but figure I can use the VGA to Component cable to hook into the TV as I have seen in some youtube videos but now im getting conflicting information in tha …
Image

Display Devices • RGB Issue with Direct Video

MISTerFPGA about 27 days ago

I recently got an RGB CRT and I'm having an issue getting the mister to cooperate with it. I have a VGA to RGB BNC cable, if I use the Analog I/O board VGA output I get a correct image on the CRT. My usual set up is a CRT connected via S-Video so I was ho …

Display Devices • New pvm user - what cable to use ? Only one sync input on display

MISTerFPGA about 1 month ago

I picked up my first pvm today, I had planned on using my existing monitor cable which is a vga - bmc which has red green blue grey and black but the pvm has a combined sync input I can see colours on screen but not synced, is there a better cable I shoul …

Display Devices • Direct Video to HDMI Switch to Retrotink 4K

MISTerFPGA about 1 month ago

Hello and sorry if this is the wrong place to post for help. I've been testing out direct video mode into a Retrotink 4K and I'm very pleased with the results. After I completed my testing, I decided to add the mister into the rest of my setup, and I'm ge …
Image

Display Devices • Output to a LCD TV and a CRT TV/monitor through direct video without having to disconnect cables

MISTerFPGA about 1 month ago

I was meant to post this some months ago but got caught up in other things, and now with dual RAM not being needed anymore (at least for now) and the PWM cores outputting 24 bit color, Direct Video doesn't seem to be much relevant anymore. But I'm posting …
Thumbnail

Display Devices • Vectrex Output to an Oscilloscope Through VGA Port

MISTerFPGA about 2 months ago

I made some modifications to the Vectrex core to get XYZ output from the VGA port for an oscilloscope.Here is my github fork with some more details and pictures:https://github.com... included Gerbers and STLs so you can make your …

Give me old PC game recs

Neo Geo Forums about 2 months ago

System: Cyrix 486dx2 50mhz 16MB RAM Gravis Ultrasound Trident VGA Dos 6.22 + Windows 3.1 I have obvious stuff like Doom, early Duke nukem and commander keen already. The PC will not be able to handle 3D stuff unless it is extremely primitive, think no …

Official Addon Boards • New I/O Board, AV Board

MISTerFPGA about 2 months ago

As someone who's not technically minded (I struggle opening a carton of milk) This (below) seemed like a bit of a big deal.. I wonder if anyone can explain the differences between these updated boards and the old ones, and is it worth upgrading?.. many th …
Image

CGA to SCART adapter

VCFed about 2 months ago

For all those that are interested, I made a CGA to SCART/VGA 15 kHz adapter. ... - profdc9/CGA2Scart: A PCB for a CGA To SCART adapter A PCB for a CGA To SCART adapter. …

IBM PS/1 not starting up

VCFed about 3 months ago

I received a PS/1 that did not start up. "Did" because I did a hack. When powering the system, the LED on the monitor just lights up for a second. But it does that as well without the computer. So I thought the trouble could be the monitor part. …

Tandy CoCo3 plus extras - $450CDN

VCFed about 3 months ago

Selling my Coco 3. It is in really great shape. Looks like new. Located in Ottawa. Has 6309 and 1MB RAM. It also has an RGB to VGA cable which, depending on the monitor, can directly plug in and work. Also I have a Roy Justus VGA adapter for this machine …

Vendex Headstart VGA M-888-VC

VCFed about 3 months ago

Hi, I don’t know specific forum for a monitor but this one goes with a 286 so seemed ok. Anyway, the monitor seems to work great but it keeps shutting off on me, and if I wait a minute and turn it back on it seems to go back on. Anyway, got any ideas …

Display Devices • Best Settings for NEC XM-29 plus via RGB

MISTerFPGA about 3 months ago

I have a feeling I'm not taking advantage of this great monitor for my Mister FPGA. I have the mister hooked up with a VGA -> RGB cable in the back of the monitor. This monitor can handle many types of resolutions. Currently, it seems like the monitor …

Display Devices • Trouble with svideo output

MISTerFPGA about 3 months ago

I’m not getting any image on either of my CRTs when using the VGA output with an active YC adapter. I’ve made the required changes to mister.ini, changing the VGA output to svideo, and composite sync to 1. I’ve supplied power to the USB C input o …

Conversion of NeXT color video signal

VCFed about 3 months ago

As limited space requires maximizing system-to-display ratio, I have several NeXT systems pushing their color video signals through passive VGA switches to capable multisync monitors. However, I would like to eliminate the VGA switches and be able to conne …

NuXT onboard video stopped outputting signal

VCFed about 3 months ago

Messing around trying to get a video card working in a slot, now my onboard video doesn't output anything. I've restored dip switch 1 and 2 to on (VGA/EGA) and switch 7 to on (enable onboard video) and the system boots fine. Just no video. Is it supposed t …

PGC issues, displays only blue in CGA emulation

VCFed about 3 months ago

Wanted to get some feedback here before I go any further. My PGC powers and the CGA emulation does work, but it displays only blue. At first it was very dim, and I think it actually displayed only green (or maybe it was just very hard to see). It only work …

recovering an SGI indigo

VCFed about 3 months ago

hey all, i have an unhappy indigo in my collection- i recently replaced the CPU battery since the diagnostic LED was yellow and i could get nothing on my display. this fixed the issue with the yellow LED and the CPU seems happy from the outside, but now i …

Performa 450 new user

VCFed about 3 months ago

Hey, I couldn't pass the opportunity to get this wonderful pizzabox machine. The previous owner says it's working. I don't have any Mac experience before PPC, completely going into uncharted territory here. Power is ok, fan starts, HDD spins up, no furthe …
Image

DECMate III Display Options

VCFed about 3 months ago

Hello everyone! I recently picked up (or should I say, saved ), a DECMate III computer. Unfortunately it came alone, without any accessories. I was wondering what would be the easiest way to get a display for it, preferably gentle on the wallet too! My opt …

Display Devices • Picture quality between using a YPbPr or RGB on a CRT ?

MISTerFPGA about 3 months ago

I was wandering as im about to setup Direct Video after having recently purchased a HDMi to VGA adaptor based on the Dac Test results from here: https://docs.google.com/spr... ... edit#gid=0, what provides the best video output RGB or YPbPr into …

Text corruption after BIOS on internal LCD only, external display fine on Portable PC III (Orchid)

VCFed about 3 months ago

I have a Portable PC III by Orchid Systems - a 386 compaq portable III clone that takes a regular MB with a special video card for the LCD. Plugging in a VGA monitor, everything works fine - the initial BIOS boot screen, and then DOS afterwards. Using the …