Included tags: SCSI ×
Excluded tags: None

Help With Ultrastor 24F SCSI EISA Config

VCFed about 9 months ago

Hi all, I am currently trying to configure an Ultrastor 24F SCSI EISA card in my Anigma motherboard EISA system. I have the EISA .CFG file and I successfully loaded it using an EISA configuration utility, however no matter what I do/change I get an error …

32-bit acorn hardware • SCSI - request for information

Stardot about 10 months ago

Partition Manager has not been tested with many SCSI Podules. If you have one that isn't listed below and don't mind testing Partition Manager, I would be grateful for feedback. Download the latest PM build from the feedback thread on the JASPP site.Som …

Multiple Sharp XVI, Expert, ACE, Pro, and 68030 Systems for Sale.

VCFed about 10 months ago

I have a total of 3 XVI's for sale at the moment along with a bunch of other models. 2 of the XVIs are interesting as one had custom work done to it and has a CD-ROM and SCSI 3.5 floppy alongside the 5.25 drives. The second has the Sharp Xpander unit whic …

SCSI Blue Ribbon SE connector+terminators cheap

VCFed about 10 months ago

Not my auction, but there's a BIN for combo Amphenol/Blue Ribbon/Centronics SCSI terminator that's cheap and is a feed-through model. I picked up a couple and they're new, Micro Net M10001. If you need them, this is a good deal: https://www.ebay.com/it …
Image

Andes SATA to SCSI Enclosure (Mountain Secure Systems)

Tinker Different about 10 months ago

Just discovered this company, Mountain Secure Systems, that produces a line of SATA-to-SCSI enclosures for legacy systems, the "Andes Series SCSI Interface to SATA Conversion". There is not any obvious way to purchase just a single unit, or even …
Image

Newer Technology SCSI Dart / SCSIdart driver or software

Tinker Different about 10 months ago

Hello, I'm looking for a driver or software package that shipped with the Newer Technology SCSI Dart, a RAM disk drive. Any leads would be great! I've checked the usual places, but nothing so far. It is also possible it could carry an odd name. Thank …

FS: Sun Ultra 1 parts $50

VCFed about 10 months ago

I have for sale a lot of untested Sun Ultra 1 parts. These were removed from a system that had a dead power supply and are not tested. Includes 6x sticks of RAM, SCSI CD-ROM, frame buffer card and a SCSI hard drive with bracket. Asking $50 shipped CONUS fo …

Getting a larger harddrive to work in my IBM 56 486SLC2

VCFed about 10 months ago

Hi there can somebody give me a advice how to do this? I have several IBM 32160 2GB 68PIN drives and I want to install one in my Model 56. (I use a 68>50 converter) Currently I use a IBM 540MB that is working fine. If I change it to the 2GB drive, the …

160mb Micropolis SCSI HDD Errors

VCFed about 10 months ago

Hey everyone. I recently bought a project portable computer that came with a 160 MB SCSI hard drive and controller card. The drive is a Micropolis 1674-7 160mb and the controller is a Future Domain TMC-885. The motherboard was bad in the computer (anothe …

What can be the cause?

VCFed about 10 months ago

I have this computer 8088 - 8MHZ DTK look a like PIM TURBO 640 Motherboard Motherboard have a full 640Kb of system memory. Clone IBM XT case. (No LEDs or TB switch) (but there on the motherboard (header) Seagate ST-296N 84MB Partitioned: C: 42MB D: 39MB …
Image

The SCSItron with BlinkyLights

Tinker Different about 10 months ago

In order to assist the BlueSCSI sellers in testing their devices, I created this semi-monstrosity known as either the SCSItron or BlinkyTester or something along those lines. It's the SCSI-est thing I've ever made. It consists of a standard 50 pin SCSI i …

HP e3000 A500 won't boot from DDS DAT ?

VCFed about 10 months ago

Hi vintage computer enthusiasts! I recently got hold of a HP 3000 A500 including a Storage Works Tape Array drive rack and two HP AutoRaid 12H SCSI storage systems. Unfortunately the array failed due too many failed disks so I had to reformat the whole ar …

General Old Hardware • 386—>486 build

Vogons about 10 months ago

This build has been a while in the making, for the longest time it was parts on the counter without a caseFilenameIMG_0086.jpegFile size1.76 MiBViews65 viewsFilenameIMG_0091.jpegFile size1.53 MiBViews65 viewsSpecs and work are as follows:-Removed barrel b …

Difference MSDOS 4.01 and IBM PC DOS 4.01

VCFed about 10 months ago

Can someone explain me what the difference between MS-DOS 4.01 and IBM PC DOS 4.01 Are they really the same as what options you have? Or is PC DOS more advancer? What are the PROs and Cons of both osses.? I really like to install version 4.01 on my 8088 …

General Old Hardware • Help getting Media Vision External SCSI CD-ROM working

Vogons about 10 months ago

Hi all (: This is the first CD-ROM I had access to as a kid, so it'd be pretty cool to get one working on my Compaq 386.The Problem:Detected by SCSI ASPI install, but not detected by CD-ROM driver on BootCopy code to clipboard1"Device driver not found: 'A …

32-bit acorn hardware • A5000 - Power requirements, I'm curious

Stardot about 10 months ago

I was wondering if anybody had any detail on the 5v power requirements for an A5000.I'm asking out of curiosity because I had mine apart over the weekend to give it the once over and make sure there's been no further corrosion since I repaired a bunch of …

General Old Hardware • Large disk support for Adaptec 1520B / 1522B

Vogons about 10 months ago

Continuing the effort started in these threadsINT13 Extensions to SDMS 3.0 & 4.0 - SCSI by NCR / Symbios Logic / LSI Logic , resulting in https://github.com/karcherm... some love for Adaptec's ugly ducklings: Adding big drive support to EI …

General Old Hardware • SCSI 50 Pin HDD

Vogons about 10 months ago

Hello everyone, I sincerely hope someone can help me out on this; I finally found my HDD from the mid 90s and i'm dying to get it working.Apparently it's a 50 Pin SCSI with additional power pins. Another HDD I managed to adapt has effectively 39 Pins. Tha …

External Mac SCSI Drives

VCFed about 10 months ago

Dumb question.. are Apple branded external SCSI Drives able to be adapted to bigger drive sizes (temporarily). I have a 330gb HP drive that someone stuffed into a Bell and Howell Disk II chassis and want to connect to a Mac to see what's on it. But none …

8-bit acorn software: other • External ADFS for 1MHz Bus Second Winchester Controller

Stardot about 10 months ago

Following on from my "Internal ADFS", I've now made a special build of ADFS 1.50 which maps to a different address on the external 1MHz bus, so it can be used with a different controller. This works on my modified Akhter host adapter mapping to &FC44 …

Macintosh IIci $400

VCFed about 10 months ago

Macintosh IIci Everything pictured is included with the exception of the monitor. This machine has been recapped floppy drive cleaned and everything works great. Specs: 32MB RAM 1.2 GB SCSI Quantum Fireball Apple Extended Keyboard II in excellent condition …

FS: GGLabs Apple II SCSI card w/free BlueSCSI

VCFed about 10 months ago

I have a new/unused/extra GGLabs SCSI card I had stashed. I've accepted I'm not going to use this spare so I'd like to move it along to someone else. Includes the dsub cable, and a tested DB25 BlueSCSI (No SD card, but I can send you a couple of image file …

Cp-System III (CPS3) Capcom multigame conversion kit

Arcade Projects about 11 months ago

Hello everyone, I have a tested working Cp-System III (CPS3) Capcom multigame conversion kit for sale. * Capcom custom SH2 cartridge (no shell)! * Latest CD UltraBios installed! * Suicide battery removed! * Region selectable at boot start up! * Ori …

8-bit acorn software: other • Internal ADFS for M128 AIV SCSI

Stardot about 11 months ago

Thanks to MPH1708 with the loan of a Master internal VFS adapter, and Hoglet for a lot of help and advice, I could finally play about with BeebSCSI and see if I could get read/write access working with VFS. I already knew the VFS OSWORD call enables any …

Looking for a Working Bernoulli Box that Uses the 90 MB Bernoulli Disk and/or its SCSI Cables

VCFed about 11 months ago

Hi Everyone, I'm new to the Vintage Computer Federation Forum, but I hope members can help me with a very good, important cause. From 1988 to 1992 I created a dBase III-Plus database with DOS and saved it with a Bernoulli Box "Transportable" on …